Featured Products from Data Excellence Brands

Featuring this month's SEMA Data Excellence level brands' products from B&W Trailer Hitches, BluePrint Engines, Fluidampr, K&N, and QA1!

Fluidampr - Harmonic Balancer - Ford - 2013-2025 - 2.0L 2.3L I4 Ecoboost – Each – Part No. 610211

Protect your Ford 2.0L or 2.3L Ecoboost engine from harmful torsional vibration with a Fluidampr viscous damper designed for high-performance street, road racing, rally or off-road applications. Increased torque, RPM and rotating assembly changes can reduce the effectiveness of stock elastomer-style dampers. Fluidampr viscous damping technology helps control crankshaft harmonics across the entire RPM range to support long-term engine durability, accessory drive stability and reduced wear on critical components. Application Summary: 2013-2025 Ford 2.0L/2.3L I4 Ecoboost equipped vehicles including popular; 2013-2018 Ford Focus ST, 2016-2018 Ford Focus RS, 2015-2023 Ford Mustang, 2019-2025 Ford Ranger, 2021-2025 Ford Bronco, 2021-2025 Ford Bronco Sport Badlands.

Broad RPM range protection.
Reduce risk of crankshaft failure.
Reduce wear on critical engine parts.
Unleash lost torque & horsepower.
No maintenance required.
Superior durability.
SFI 18.1 spec. Race proven for over 35 years.
Made in USA

B&W Tow & Stow Dual Ball Adjustable Ball Mount, 3" Drop, 3-1/2" Rise, 2" Shank, 2" and 2-5/16" Balls - Black Powder Coat Finish – Part No. TS10033B

Pull your boat to the lake, mower to the shop, or tractor to the job site-all with the same ball mount. The Tow & Stow's adjustable height and multiple ball sizes mean it can fit most any trailer. Easily stow it under the vehicle when you're done towing, so you never have to knock your shin or shut the garage door on a hitch again.

Multiple ball sizes eliminate the need for multiple ball mounts
This trailer hitch stows under the vehicle when not in use
Fits any standard 2" receiver
Height adjusts in 1" increments for level towing
2 Step Finish: E-coat and powder-coat which provides improved corrosion protection inside and out
Manufactured from high-yield tubing

QA1, QA1 R223-130S Four Link Kit with QA1 9in. Housing Double Adjustable, and Part No. R223-130S

Take your 1964–1966 Mustang’s rear suspension to the next level with QA1’s fully engineered 4-link and 9-inch housing system. This complete kit replaces outdated leaf springs with a modern triangulated 4-link and double adjustable coilovers - giving you full control over ride quality, stance, and handling. Designed for street performance, autocross, or restomod builds, it’s a serious performance upgrade that fits like it belongs there. BUILT FOR PERFORMANCE & PRECISION QA1’s 4-link design eliminates axle wrap, wheel hop, and the inconsistencies that plague leaf-spring setups. Geometry-optimized brackets maintain correct pinion angle and suspension alignment through the full range of motion, providing improved traction and predictable handling on any road surface. DOUBLE ADJUSTABLE COILOVERS Fine-tune your Mustang’s performance with QA1’s double adjustable shocks, which independently control rebound and compression. Whether you’re dialing in for track conditions or adjusting for a smoother street ride, you get precise control with 18 clicks of adjustment on each circuit. STRENGTH MEETS STYLE Each kit includes QA1’s custom fabricated 9-inch housing, engineered for serious horsepower and clean fitment. The housing’s formed brackets, heavy-duty 3” OD ¼” wall axle tubes, and 31-spline alloy axles deliver maximum rigidity and support up to 800 HP. Combined with a semi-gloss powder coat finish, it’s as tough as it looks. RIDE HEIGHT FLEXIBILITY Easily adjust ride height from factory stock height to 3” lower, giving you full control over stance without compromising drivability or geometry. EASY INSTALLATION The QA1 system uses self-fixturing weld-in brackets that ensure correct geometry and alignment without a custom jig. The included 9” housing bolts into place for a clean fit — no guesswork required.

Application-specific fit for 1964–1966 Ford Mustangs
Complete rear suspension system: 9” housing, 4-link, and coilovers
Double adjustable shocks: independent rebound and compression control
Adjustable ride height from stock to –3”
Eliminates wheel hop and axle wrap
Heavy-duty fabricated 9” housing rated to 800 HP
31-spline 1541H alloy axles rated to 650 HP
Big Ford “New Style Torino” flanges with 2.5” axle offset
5x4.5” bolt pattern for wide wheel compatibility
Includes drain plug, fill plug, vent port, and jack pad for easy service
½” x 3” wheel studs for better fitment with aftermarket wheels
Durable semi-gloss powder coat finish
Weld-in installation with self-fixturing brackets for perfect alignment

BluePrint Engines - 496 c.i. GM Big Block Compatible - Base Dresses - Carburetor. Includes 30-Month / 50,000 Mile Warranty & Dyno Tested – Part No. BP49613CTC

Give your truck the big-block torque it deserves. With 451 horsepower and 523 lb-ft of torque, the BluePrint Engines BP49613CTC is built to deliver hard-hitting low-end performance and strong throttle response right where truck owners want it. The high-torque hydraulic roller cam helps put that power to work down low, while the 8.7:1 compression ratio keeps things practical with the ability to run on 87-octane fuel. A forged rotating assembly and aluminum cylinder heads provide the strength and durability to back it all up, giving you a powerful, street-friendly big block that’s ready to work, cruise, and enjoy.

Horsepower & Torque: 451 Horsepower / 523 ft. lbs. Torque
Compression Ratio: 8.7:1
BluePrint Engines Aluminum Heads
BluePrint Engines Hydraulic Roller Cam
BluePrint Engines Forged Crank
BluePrint Engines Forged Pistons

K&N Performance Air Intake System – Part No. 63-1136

The K&N 63-1136 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in select Polaris Ranger RZR models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1136 air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a free-flowing aluminum intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are a ratchet set, a few wrenches, and flat blade screwdriver.

Increased Horsepower: Guaranteed to increase horsepower, helping unlock greater performance from your engine.
Enhanced Driving Experience: Improves throttle response and improved engine sound.
Premium Construction: Built with premium intake materials and a durable, high-quality finish designed for lasting performance.
Washable & Reusable Air Filter: Includes a High-Flow Air Filter that can go up to 100,000 miles before cleaning under normal highway driving conditions

To get access to the rest of these brands' product data, log into your SEMA Data account. Don't have an account? No problem. Sign up here for FREE and get access to hundreds of brands.