CSF Cooling, CSF Universal Large Single-Pass Oil Cooler - M22 x 1.5 - 12.0L x 9.33H x 2.16W – Part No. 8371

CSF oil coolers are much more robust, durable, and can withstand a higher peak burst rate. This allows the cooler to be mounted in areas that might get high debris (front fascia, diff cooler, side vents, etc...). The CSF oil cooler is designed to withstand a tremendous amount of vibration and debris.  

The new oil cooler features CSF's unique "Aero-Flow" Bar Design. This core design offers weight savings over traditional bar/plate cores without sacrificing durability. CSF's proprietary design offers maximum oil and airflow through the core.  

The CSF #8371 uses the same M22 x 1.5 Inlet/Outlet connections as most of the CSF Oil Coolers. This threat pitch offers a huge variety of connection options while maintaining the best possible flow characteristics. With a nominal diameter of 22mm, the M22 x 1.5 threaded bungs are large enough to work with adapter fittings as large as -16AN. CSF also included two 1/8 NPT Ports on each tank for bleeding or temperature sensors.  

All CSF Oil Coolers utilize a 3 hole mounting system on ends of the core. The position and orientation allows for a wide variety of mounting options. The M8 x 1.25 thread pitch offers more than enough tensile and sheeting strength for extreme durability and easy to source hardware.  

The oil cooler can be clocked in any orientation for mounting. This oil cooler is used on the CSF Ford GT Transaxle Oil Cooler mounted in a sideway configuration. However, a vertical orientation with the inlet/outlets pointed up or down will be the most common use base for most universal applications.  

CSF oil coolers are much more robust, durable, and can withstand a higher peak burst rate than common brazed plate-type/stacked designs. This allows the cooler to be mounted in areas that might get high debris (front fascia, diff cooler, side vents, etc). When using a conventional oil cooler, the type of mounting locations are often not considered due to the risk of damage. The CSF oil cooler is designed to withstand a tremendous amount of vibration and debris. You can even stand on it!

• Core Dimensions: 9.25" L x 9.33" H x 2.16" W (235mm x 237mm x 55mm)
• High Efficiency & Rugged Durability Bar/Plate Design
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• M22 x 1.5 Inlet/Outlet Connections
• Two 1/8 NPT Ports on each tank for bleeding or temperature sensors
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi    

HPS Performance Oil Catch Can Kit Red – Part No. 860-024    

Engineered for the most demanding driving environments, the HPS Performance Oil Catch Can Kit is the essential upgrade for trapping destructive crankcase contaminants. This kit works to capture oil blow-by, halting the power-robbing carbon accumulation before it starts. By maintaining a cleaner combustion process, the HPS catch can ensures your engine operates at its full potential and dramatically extends the service life of its most important parts. Constructed from robust billet aluminum and featuring a high-capacity 5oz reservoir, this catch can is built for rigorous use. Maintenance is effortless, thanks to the integrated dipstick for fluid inspection and simple-to-remove canister for convenient servicing on the go. The installation process is designed to be quick and direct, utilizing a custom-fit bracket that guarantees a secure, bolt-on fit with no modifications required. This comprehensive kit comes complete with premium -10 AN hoses and fittings. Integrate the HPS Performance Oil Catch Can into your vehicle to shield your engine from harmful impurities and optimize its efficiency.

• Protects engine from power-robbing oil blow-by.
• Keeps your intake valves clean.
• Includes all necessary parts and hardware a hassle-free bolt-on installation without needing any additional modifications. 
• Anodized aluminum dipstick to monitor fill level. 
• Easy maintenance using a 14mm wrench or socket. 
• Maximum capacity 5 fluid ounces. 
• Heavy duty powder coated steel mounting bracket for long-lasting durability. 

Speedmaster - Chevy SBC 350 B-4.125 M-350 DH-9.025 4-Bolt Billet Main Bare Iron Engine Block – Part No. 1-286-002-01

If your standard Bowtie block could handle 1500+ HP it would be Speedmaster's H1 engine block. Design from the ground up based upon your favourite bowtie block with the ability to handle naturally aspirated, supercharged, turbocharged and nitrous applications. The Speedmaster H1 is the perfect starting point for a powerful and reliable engine build suited for the street or race track. Precision pre-machining is the perfect starting point for a powerful and reliable engine eliminating time and expense of blueprinting a stock block or ''semi-finished'' factory casting. Best of all can be used with standard off the shelf small block components.Speedmaster H1 Chevy SBC bare blocks feature: Cast from premium high-strength Class 32B ironStandard deck height allows the use of off the shelf partsUses standard small block Camshaft, Timing Chain, Oil pump, Oil filter, Motor Mounts.  

• Cast from premium high-strength Class 32B iron
• Standard deck height allows the use of off the shelf parts

Bilstein - Suspension Kit – Part No. 47-314009

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV. 

• Vehicle specific tuning
• 60mm digressive piston improves ride comfort and control over rough terrain
• Large 60mm body for increased oil capacity, cooling, and long-term durability 

Westin - Adventure Mounts Complete Dash Mount Kit – Part No. 10-23705 

Westin Adventure Mounts Complete Dash Mount Kits are engineered for select vehicle applications to match the factory dash layout, delivering a clean, integrated installation with no drilling or permanent dash modification required. Each kit includes a secure dash-mounted base, mounting ball base, arm mount, and phone holder to keep your device stable, accessible, and ready for the road ahead. Built with a durable extruded aluminum top base and steel mounting brackets, this dash mount system provides reliable strength and stability for daily driving, work, and off-road adventure. Designed for DIY-friendly installation using basic tools, the kit features a Black Powder Coat finish, aluminum construction, and is backed by a Limited Lifetime Warranty. 

• MComplete Secure Mounting Solution - Includes a dash-mounted base, mounting ball base, arm mount, and phone holder to keep your device stable and within reach.
• Vehicle-Specific Fit - Designed for select vehicle applications to match the factory dash layout and provide a clean installation.
• No-Drill Installation - Uses OE mounting points with no permanent dash modification required.
• Durable Aluminum and Steel Construction - Built with an extruded aluminum top base and steel mounting brackets for strength and stability.
• DIY-Friendly Setup - Simple installation with basic tools.