Featuring this month's SEMA Data Excellence level brands' products from Borgeson, CSF Cooling, KW, and LEED Brakes! 

Borgeson - Steering Shaft For 2008-2016 Ford F250, 350, 450 Super Duty heavy duty telescopic steel lower intermediate steering shaft. - Part No. 000308

This Borgeson replacement assembly incorporates a needle bearing vibration reducer/u-joint and heavy-duty shaft assembly other. These steering assemblies are easy to install with common hand tools. In about an hour, your truck will have vastly improved steering characteristics. 

  • Smooth telescopic shaft easily absorbs flex between the body and chassis.
  • Heavy duty billet steel universal joint provides a precise zero play connection from steering box to either factory or Borgeson upper shaft.
  • Made in the USA. 

KW Suspensions 1021000P KW V1 Coilover Kit - Audi A3 - Part No. 1021000P

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the N?rburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.

  • KW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.
  • Every single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery. 
  • With the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you. 
  • Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength. 
  • Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan
  • Seamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look. 
  • Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
  • Limited Lifetime Warranty - Unlimited Mileage

CSF Cooling BMW S54 Swap E36 High-Performance All-Aluminum Radiator – Part No. 7211

CSF's industry-leading reputation and deep knowledge of high-performance BMW cooling systems offered an edge when designing such a unique cooling system. Combining the experience from producing the best cooling systems for the E36 and E46, CSF was able to design and produce an innovative solution that covers the widest range of S54 swap customers possible. Because the S54 requires a much more robust oil cooling system than the E36's S52, CSF made special provisions to fit two different race spec oil coolers. To do this, the height of the radiator was reduced slightly so the oil coolers can fit under it in a factory style location. The radiator includes mounting brackets which can be adjusted to fit both oil coolers (CSF #8032 & #8240). CSF also includes brackets for an electric fan conversion. These brackets are designed to fit a single 16 inch SPAL Fan (not included). While it is possible to retain a clutch type fan, it is much easier to convert to an electric fan on top of the performance benefits.

  • 2-Row - 42mm Ultra-High-Performance Core
  • Includes Oil Cooler Mounting Brackets that fit both the CSF #8240 & CSF #8032
  • True Plug-and-Play "Drop-in Fit" Installation Requires Absolutely No Modifications
  • Individually Leak and Pressure Tested
  • 2-Year Limited Warranty
  • CSF's Exclusive B-Tube Technology
  • 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
  • CNC Machined Mounting Brackets, Fittings, and OEM Style Inlet/Outlet

Leed Brakes BFC0001-405X Brake Conversion Kit – Part No. BFC0001-405X

Add the safety, reliability and performance of disc brakes to your vehicle with our drum to manual disc brake conversion. In this kit you receive everything you need to mount black powder coated factory style 4 piston disc brakes to the original drum brake spindles currently on your vehicle. As an upgrade to our standard kit, this kit includes our MaxGrip XDS Cross Drilled & Slotted Rotors as well as Braided Hoses. This 1965-66 Mustang front disk brake conversion kit is a direct bolt on with NO cutting, drilling or welding required. All components used in these kits are new high quality, precision machined products. A great kit with a factory look and easy installation! Note: Fits 64-69 V8 drum brake spindles. Also fits 67-69 6cyl spindles but converts the vehicle to 5 lug.

  • Bolts directly to factory drum brake V8 spindles
  • Includes 4-Piston calipers and 11-1/4" rotors 

To get access to the rest of these brands' product data, log into your SEMA Data account. Don't have an account? No problem. Sign up here for FREE and get access to hundreds of brands. 

 

Follow us at FaceBook and LinkedIn for more frequent news and highlights.