Featured Products from Data Excellence Brands

Featuring this month's SEMA Data Excellence level brands' products from Advanced Clutch, PowerTrax, QA1, Rally Armor, and Ridler!

QA1 Level 2 Full Vehicle S10 Suspension Kit - Part No. HK02-GMS1

The QA1 Level 2 Handling Kit for 1982-2003 Chevy S10 pickups delivers a balanced, full-vehicle suspension upgrade engineered to work together from front to rear. Designed for street performance enthusiasts, this kit improves handling response, steering feel, and ride quality while achieving a clean, lowered stance. QA1 assembled this system as a complete solution. Every component was hand selected to complement the others, giving you predictable performance, proper geometry, and an easier path to a well-sorted truck. PERFORMANCE & STANCE YOU CAN FEEL Capable of a 2-4” drop up front and up to a 5” drop in the rear, this Level 2 kit delivers a clean, lowered stance. Up front, 18-way double adjustable QA1 coil-over shocks allow you to fine-tune ride quality while maintaining confident control through corners. Tubular upper and lower control arms improve suspension geometry and strength, helping the truck feel more planted and responsive on the street. Forged drop spindles correct steering geometry at lowered ride heights, reducing bump steer and maintaining proper alignment throughout suspension travel. A QA1 fat front sway bar further improves handling control, delivering flatter cornering and improved stability during spirited driving. Out back, lowering rear leaf springs were chosen for the right spring rate and unique reverse spring eye design. The front spring mount is optimized for improved anti-squat characteristics, giving you more control over how the truck plants power to the ground, especially when launching or cornering. BOLT-IN CONVENIENCE, NO GUESSWORK This QA1 Handling Kit is designed as a direct-fit, bolt-on solution for 1982–2003 S10 pickups. Components are selected and validated to work together, eliminating the trial-and-error.

QA1 double adjustable coil-over shocks allow ride quality tuning to match your driving style
Tubular QA1 upper and lower control arms improve strength and suspension geometry
QA1 front sway bar reduces body roll and sharpens handling response
Proforged drop spindles maintain proper steering geometry at lowered ride heights
Detroit Speed rear leaf springs add built-in drop while maintaining ride quality
Engineered as a complete front and rear system for predictable performance
Bolt-on installation designed for street performance builds
Ideal for enthusiasts looking for improved handling without harsh ride quality

Rally Armor 2024-26 Toyota Tacoma - Black Mud Flap/Red Logo – Part No. MF114-UR-BLK-RD

Crafted from premium polyurethane, these UR (as in "you are") mud flaps have been engineered to perform consistently in a variety of environments. Our flexible UV-resistant urethane mud flaps are durably abrasion resistant and long wearing. These UR (as in "you are") premium urethane mud flaps are formed for variably high hot and/or low cold temperatures giving drivers 4 corner protection against salt, spray, paint damaging gravel, tar and grime that prematurely wear the vehicle finish away. Where vinyl and rubber manifests steady, visible material curling and wear over time, strong urethane construction maintains its form through all weather conditions.

ENo Drilling Required
Made in the USA
Hardware Included

PowerTrax Race-Ready Differential Lock Assembly for Ultimate Grip and Launch Control – Part No. 9214803100

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

Comes Fully Assembled
Delivers Progressive and Variable Traction
Allows You to Control How Much Traction is Applied
Uses 3x2 Spiral Gear Technology
Housed in a Fully Machined, Forged Steel Case

ACT 225mm Mod-Twin Push-Type Clutch Kit – Nissan Skyline GT-R R32 (1989–1992) - Part No. J8124777

Engineered for RB26DETT-powered performance, the ACT 225mm Mod-Twin delivers race-proven torque capacity with smooth street drivability. Featuring ACT’s Mono-Drive hub for clean release and extended spline life, a forged aluminum cover for improved pedal feel, and a precision-balanced twin-disc assembly for ultra-smooth engagement, this clutch eliminates the compromises of traditional twin-disc designs. Modular configurations offer multiple disc, hub, and clamp-load options to match any build—from daily street to full race. Street kits handle up to 710 ft-lb, while HD and XT variants hold up to 910 ft-lb. Includes ACT XACT Streetlite chromoly flywheel and complete installation hardware. Built for Godzilla. Ready for anything.

Mod-Twin Design: The 225mm Mod-Twin clutch features a modular hub system, providing versatility, and customization options of spring or solid hubs and Organic Street or 6-Puck race discs.
Mono-Drive Hub: Continuous single hub spline reduces input shaft wear over multiple short hubs and keeps clutch release clean and consistent.
Forged Aluminum Cover: Elevates your driving experience delivering enhanced pedal feel for unparalleled performance.
Options: Very light pedal for T1, slightly more for T2.
Torque Capacity: Engineered to handle up to 910 FT- LB at the engine. These kits are ready for a variety of power-enhancing options, including superchargers, turbochargers, nitrous, and more!
Precision-Balanced Assembly: Dynamically balanced as a complete unit to ensure ultra-smooth engagement and reduce drivetrain vibration — delivering race-level precision and longevity for both track and street use.

RIDLER 661 661 GLOSS GREY WITH DIAMOND CUT FACE AND LIP 18X8 5-120.65 0MM 83.82MM – Part No. 661-8861GGD

THE ROOTS RUN DEEP IN CAR CULTURE AND THAT PASSION CONTINUES THROUGH THE GENERATIONS. RIDLER WHEELS PAYS TRIBUTE TO THE LOVE OF THE AUTOMOBILE SPANNING FROM HOT RODS, RESTO-MODS, CLASSICS, MODERN MUSCLE AND MUCH MORE. WITH A VISION TO WRITE A NEW CHAPTER IN HISTORY, OUR DESIGNS CAPTURE THE PERFECT STYLE TO MOLD YOUR DESIRE INTO REALITY. WE BUILD WHEELS CATERING FROM 15” THROUGH 22”, INCLUDING STAGGERED FITMENTS, THAT GIVE YOU THE IDEAL FITMENT. ALL OUR WHEELS ARE BACKED BY A PROMISE THAT ENSURES ONLY THE HIGHEST QUALITY ALLOYS ARE USED WHICH EASILY SURPASS THE INDUSTRY’S MOST STRINGENT STANDARDS. LET OUR INGENUITY GO BEYOND YOUR EXPECTATION.

Steet Series
SEMA Show Award Winner
Lifetime Warranty
Designed in America

To get access to the rest of these brands' product data, log into your SEMA Data account. Don't have an account? No problem. Sign up here for FREE and get access to hundreds of brands.