Featuring this month's SEMA Data Excellence level brands' products from K1 Technologies, Supreme Suspensions, and ZROADZ! 

K1 Technologies Toyota 2JZ, Connecting Rod Set, 142.0mm – Part No. 041DJ17142

K1 Technologies connecting rods are manufactured with optimized strength and weight characteristics in mind to deliver reliable performance. Forged from 4340 steel, K1 rods featured a shot-peened surface finish which smooths surface blends and reduces potential stress profiles. K1 connecting rods are held to strict quality standards and undergo magnetic particle testing to ensure material properties are free of flaws. Each rod is also subject to bore tolerance compliance, holding them to +/- .0001? after finishing. Additionally, K1 rods are balanced and tested to be within +/- 1 gram per end. A dual-ribbing design on the rod caps of K1 connecting rods helps maximize strength and allows the rod big end to maintain roundness as engine RPMs increase. Full-floating, precision-honed bronze bushings are fixed into the small ends of the rods for low friction and high wear resistance. Fitted with ARP 2000 rod bolts rated at 200,000 psi tensile strength for most applications, K1 connecting rods deliver an industry-leading combination of strength and value.

  • 4340 Forged Steel for strength, toughness, and resistance to impact
  • High quality ARP 2000 fasteners included
  • All rods are finished in the USA and held to very tight tolerances Bores finished to +/- .0001 in. and weight to +/- 1 gram per end
  • Shot peened for improved fatigue life
  • Premium bronze wrist pin bushings
  • Designed by in-house engineering team for high-stress racing applications

Supreme Suspensions 2011-2020 Chevrolet Silverado 2500HD / 3500HD 4WD 8-Lug 1-3 in. Front 1 in. Rear PRO Lift Kit w/ Shock Extenders – Part No. CHSL11FK3010A

Supreme Pro lift kits are engineered to accurately lift and level your truck for a truly customized ride. Each front and rear lift component is CNC machined for precision and accuracy. Each then receives our special coating, protecting against rust and corrosion. With its high strength and durability, this lift will never compress or warp even under the most extensive load.

  • x2 Front Torsion Keys
  • Installation Instructions
  • x2 Shock Extenders w/ Hardware
  • x2 Rear Lift Blocks
  • x4 Extended U-bolts
  • x4 Nuts and Washers
  • Lifts Front 1-3 in. Over Stock
  • Lifts Rear 1 in. Over Stock
  • Fits 8-Lug Models Only
  • Pro Pack: Decals, Air Freshener and Bottle Opener

ZROADZ 2019-2021 Jeep Gladiator Access Overland Rack With Three Lifting Side Gates, For use on Factory Trail Rail Cargo Systems - Part No. Z834211

The ZROADZ Overland Truck Bed Rack is the first truck bed accessory mounting system engineered with bed access doors designed for lighter, larger accessories that are more efficiently stored in a way that does not take up valuable bed space and can be easily moved out of the way to gain access to the bed of your truck. Spare fluid containers, traction pads, or any items weighing up to 30 lbs. can be mounted and lifted out of the way on the aluminum door frames. Hybrid heavy gauge steel and aluminum construction give this truck rack the ultimate load carrying capacity.

  • A1500 lbs. static load capacity, 800 lbs. on-road load capacity and 400 lbs. off-road load capacity
  • The rack is best suited for a closed size tent of 47"W x 55"L x 11.5"
  • Bolt-On Installation with Clamping System, No Drilling Required
  • Sold with complete LED kit, Includes, mounting brackets, wiring harness with fusible link, relay, toggle switch and all necessary hardware
  • Fits optional Trail Rail Cargo System (See part #Z834101 for Jeeps without Trail Rail Cargo System)
  • Works with Mojave Edition
  • Available with 2 lifting side gates, see part number Z834111
  • Made in USA
  • Includes Three Light Weight Aluminum Lifting Gates for Easy Access to the Truck Bed
  • Multi Slot and Thru Hole Accessory Mounting Provisions
  • Steel Channel Primary Structural Support Members
  • Aluminum Channel Secondary Support Members
  • Three Step Powder Coating Process With Texture Black Finish
  • TIG Welded Construction, Accessory Mounting Plates Throughout Framework
  • Accepts most 2 in. LED Pod Lights with provisions to cleanly route power wires
  • 10 ga steel legs with transverse cross bars, 7 ga AL lateral cross bars and door assemblies with 304 stainless pivot collar

To get access to the rest of these brands' product data, log into your SEMA Data account. Don't have an account? No problem. Sign up here for FREE and get access to hundreds of brands. 

 

Follow us at FaceBook and LinkedIn for more frequent news and highlights.